Sunday, November 10, 2024
HomeWood Floor RepairCalculating Board Foot, Sq. Foot, & Linear Foot

Calculating Board Foot, Sq. Foot, & Linear Foot


board foot calculator

There are three main measurements that each carpenter and contractor must be prepared calculate in a second’s discover. Not solely do it’s essential to know methods to calculate board foot, sq. foot, and linear foot, however you additionally have to know when to make use of every.

Should you swing by the lumberyard you’ll discover totally different objects offered in every of those codecs and if you happen to are available asking for 20 sq. toes of two×4’s or 50 linear toes of plywood you’ll get laughed out of the shop and picked on relentlessly. Sure, the lumberyard counter continues to be a bit like approaching the cool youngsters desk in highschool. You higher know the suitable solution to speak otherwise you’ll be ridiculed.

On this put up, I’ve bought calculators for every of their respective sections so you may bookmark this web page and reserve it future reference. As well as, I’ve bought the formulation for every as a result of in my view it’s greatest if you happen to perceive the ideas and formulation even if you happen to don’t want a pencil and paper to do the maths.

Board Foot Calculator

Calculating board toes is all about discovering the quantity of the wooden. Usually tough lumber is offered by the board foot since will probably be milled down into a selected product later. Identical to discovering the quantity of water in a pool, calculating board toes of lumber encompasses three totally different measurements.

Right here’s a breakdown of the variables:

  • Thickness: The thickness of the wooden in inches.
  • Width: The width of the wooden in inches.
  • Size: The size of the wooden in toes.

When calculating board toes, you sometimes use these dimensions to seek out the quantity of the wooden in cubic inches (thickness × width × size) after which divide by 144 (12 inches × 12 inches) to transform to board toes. This method is usually used within the lumber trade for estimating the quantity of usable wooden in a log or a bit of lumber.

Needless to say when you have a number of items of wooden, you’ll calculate the board toes for each bit individually after which sum them as much as get the entire board toes for all items.